Viscoelastic Anti-Corrosion Paste, also known as Viscoelastic Paste, is a novel high-performance viscoelastic anti-corrosion molding material composed of a monomer polyolefin elastomer polymer.

Our company produces viscoelastic anti-corrosion paste in compliance with SY/T5918-2017 standards and CDP-G-OGP-AC-017-2013-2 specifications. This paste exhibits dual characteristics of both solid and liquid adhesive materials. It exhibits excellent adhesion, waterproof sealing, and chemical corrosion resistance, with minimal rebound and an amorphous structure that allows shaping into any form. Primarily used for filling gaps and depressions in irregular components like steel flanges and valves, it provides external corrosion protection for non-standard equipment. No primer is required during application, ensuring ease of use. It maintains long-term non-curing, crack-free, and non-peeling properties. Due to its flexibility and stress-free nature, a polymer adhesive tape is selected for stress damage protection to ensure reliable corrosion resistance, thereby forming an excellent composite structural anti-corrosion coating system.

Since its market launch, the viscoelastic anti-corrosion paste has earned the trust of numerous users and has become a preferred domestic supplier.

1. Minimal surface treatment required, ensuring consistent quality control

2. Excellent plasticity, rapid forming capability, and resistance to deformation

3. Compatible with various coatings, preventing delamination

4. Maintains flowability across diverse environments, withstanding extreme cold and heat

5. Resistant to aging, voltage, and water absorption

1. Clean the anti-corrosion surface thoroughly to remove all debris and loose rust. Apply the viscoelastic anti-corrosion paste evenly and firmly as needed. (If skin contact occurs during application, wash off with cleaning solution and water.)

2. Use polyethylene adhesive tape ≥0.80mm thick or polypropylene adhesive tape (polyolefin adhesive tape) ≥1.10mm thick as the outer protective layer.

3. Do not perform outdoor construction during rain, snow, fog, or when humidity exceeds 85%, nor in environments with significant wind and sand.

1. Protect from rain and contamination.

2. Store in a warehouse at temperatures between -5°C and +45°C with relative humidity below 75%, and keep away from open flames.